TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 15)

8
Chapter 2 Connect the Hardware
1. Switch the operating mode to AP/Rng Ext/Client and plug the router into an electrical
outlet within the signal range of your host AP.
2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi
network name and password are on the router’s label.
Internet
OR OR
A B
Other Device Smart TV Desktop
Host AP
2. 2. 5. Hotspot Router Mode
In Hotspot Router mode, the router enables multiple users to share internet connection
from WISP.
1. Switch the operating mode to
Share Hotspot and plug the router into an electrical
outlet within the range of the public hotspot.
2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi
network name and password are on the router’s label.
A B
Public Hotspot