Riverstone Networks WICT1-12 User Manual
Page 100
5-36 Riverstone Networks RS Switch Router User Guide Release 8.0
Tunneling VLAN packets across MANs
Bridging Configuration Guide
The following explains the display:
1.
The ID number of the VLAN, followed by the ID number of the backbone VLAN.
2.
The tunnel entry/exit ports, configured with the
vlan enable stackable-vlan
command.
3.
The ports on which multicast, broadcast, or unknown unicast packets are flooded.
4.
The tunnel backbone ports, configured with the
stackable-vlan
option of the
vlan make
trunk-port
command.
5.
Tunnel entry ports that have also been configured (with the
stackable-vlan
option of the
vlan
make access-port
command) as access ports that can belong to more than one VLAN of the
same protocol type. This allows multiple VLANs to use the same tunnel entry port.