Riverstone Networks WICT1-12 - Manual (Page 439)

Riverstone Networks RS Switch Router User Guide Release 8.0 18-9
Routing Policy Configuration Configuring Simple Routing Policies
To redistribute direct routes, enter one of the following commands in Configure mode:
18.2.3 Redistributing RIP into RIP
The RS routing process requires RIP redistribution into RIP if a protocol is redistributed into RIP.
To redistribute RIP into RIP, enter the following command in Configure mode:
18.2.4 Redistributing RIP into OSPF
RIP routes may be redistributed to OSPF.
To redistribute RIP into OSPF, enter the following command in Configure mode:
18.2.5 Redistributing OSPF to RIP
For the purposes of route redistribution and import-export policies, OSPF intra- and inter-area routes are referred to as
ospf
routes, and external routes redistributed into OSPF are referred to as
ospf-ase
routes. Examples of
ospf-ase
routes include
static
routes,
rip
routes,
direct
routes,
bgp
routes, or
aggregate
routes, which are redistributed
into an OSPF domain.
OSPF routes may be redistributed into RIP. To redistribute OSPF into RIP, enter the following command in Configure
mode:
To redistribute direct routes into RIP.
ip-router policy redistribute from-proto direct to-proto
rip network all
To redistribute direct routes into OSPF.
ip-router policy redistribute from-proto direct to-proto
ospf network all
To redistribute RIP into RIP.
ip-router policy redistribute from-proto rip to-proto rip
To redistribute RIP into OSPF. ip-router policy redistribute from-proto rip to-proto ospf
To redistribute ospf-ase routes
into RIP.
ip-router policy redistribute from-proto ospf-ase to-proto
rip
To redistribute ospf routes into
RIP.
ip-router policy redistribute from-proto ospf to-proto rip