Riverstone Networks WICT1-12 - Manual (Page 194)

11-16 Riverstone Networks RS Switch Router User Guide Release 8.0
Setting Memory Thresholds IP Routing Configuration Guide
To display router discovery information:
Legend:
1. Information about the RDISC task.
2. Shows when the last router advertisement was sent and when the next advertisement will be sent.
3. The interface on which router advertisement is enabled.
4. Multicast address.
5. Current values for the intervals between the sending of router advertisements and the lifetime of
addresses sent in a router advertisement.
6. IP address that is included in router advertisement. The preference of this address as a default route
is 0, the default value.
7. Shows configured values for the specified interface.
11.17 SETTING MEMORY THRESHOLDS
The routing information base (RIB) is stored in memory in the RS. There are four configurable thresholds that
represent the percentages of the available memory that is used for storing RIB entries.
rs# rdisc show all
Task State: <Foreground NoResolv NoDetach>
Send buffer size 2048 at 812C68F8
Recv buffer size 2048 at 812C60D0
Timers:
RouterDiscoveryServer Priority 30
RouterDiscoveryServer_RS2_RS3_IP <OneShot>
last: 10:17:21 next: 10:25:05
Task RouterDiscoveryServer:
Interfaces:
Interface RS2_RS3_IP:
Group 224.0.0.1:
minadvint 7:30 maxadvint 10:00 lifetime 30:00
Address 10.10.5.254: Preference: 0
Interface policy:
Interface RS2_RS3_IP* MaxAdvInt 10:00