Riverstone Networks WICT1-12 - Manual (Page 249)

Riverstone Networks RS Switch Router User Guide Release 8.0 15-15
IS-IS Configuration Guide Displaying IS-IS Information
R3 Configuration
The following is the configuration for router R3 in Area 1:
R3(config)# sh
Running system configuration:
!
! Last modified from Console on 2000-06-28 22:48:47
!
To configure IP interfaces:
1 : interface create ip 21net address-netmask 21.1.1.2/16 port et.1.3
2 : interface create ip 24net address-netmask 24.1.1.1/16 port et.1.1
!
To configure router R3’s area:
3 : isis add area 49.da01
To enable IS-IS on each interface:
4 : isis add interface 21net
5 : isis add interface 24net
To set parameters for each interface:
6 : isis set interface 21net encap iso priority 10 metric 10 level 1
7 : isis set interface 24net encap iso priority 10 metric 10 level 1
To set the IS-IS level of router R3:
8 : isis set level 1-and-2
To start IS-IS on router R3:
9 : isis start
!