Riverstone Networks WICT1-12 - Manual (Page 672)

30-68 Riverstone Networks RS Switch Router User Guide Release 8.0
Scenarios for Deploying Channelized T1, E1 and T3 WAN Configuration
The following configuration applies to the T1 interfaces on the RS 8600 router at the head office, hqsite.
!-----------------------------------------------------------------------------
!Configuration for the RS 8600 T1 interfaces
!-----------------------------------------------------------------------------
!Bundled T1 interfaces to the rsite:
!-----------------------------------------------------------------------------
port set t1.2.1 framing esf lbo -7.5db
port set t1.2.1:1 timeslots 1-24 wan-encapsulation ppp
port set t1.2.2 framing esf lbo -7.5db
port set t1.2.2:1 timeslots 1-24 wan-encapsulation ppp
port set t1.2.3 framing esf lbo -7.5db
port set t1.2.3:1 timeslots 1-24 wan-encapsulation ppp
port set t1.2.4 framing esf lbo -7.5db
port set t1.2.4:1 timeslots 1-24 wan-encapsulation ppp
ppp create-mlp mp.1 slot 2
ppp add-to-mlp mp.1 port t1.2.(1-4):1
interface create ip to_rsite_mppp address-netmask 120.210.4.1/24 port mp.1 up
!-----------------------------------------------------------------------------
!Full (unstructured) T1 interface to the rsite:
!-----------------------------------------------------------------------------
port set t1.3.1 framing none wan-encapsulation ppp
interface create ip to_rsite_fullt1 address-netmask 120.210.1.1/24 port t1.3.1 up
!-----------------------------------------------------------------------------
!Fractional T1 interface to the rsite:
!-----------------------------------------------------------------------------
port set t1.3.2 framing esf lbo -7.5db
port set t1.3.2:1 timeslots 1-12 wan-encapsulation ppp
port set t1.3.2:2 timeslots 13-18 wan-encapsulation ppp
port set t1.3.2:3 timeslots 19 wan-encapsulation ppp
port set t1.3.2:4 timeslots 20 wan-encapsulation ppp
port set t1.3.2:5 timeslots 21 wan-encapsulation ppp
port set t1.3.2:6 timeslots 22 wan-encapsulation ppp
port set t1.3.2:7 timeslots 23 wan-encapsulation ppp
port set t1.3.2:8 timeslots 24 wan-encapsulation ppp
interface create ip to_rsite_fract1 address-netmask 120.210.24.1/24 port t1.3.2 up
!-----------------------------------------------------------------------------
!Configure RIP:
!-----------------------------------------------------------------------------
rip add interface to_rsite_mppp
rip add interface to_rsite_fullt1
rip add interface to_rsite_fract1
rip start