Riverstone Networks WICT1-12 - Manual (Page 107)

Riverstone Networks RS Switch Router User Guide Release 8.0 6-7
SmartTRUNK Configuration Guide Configuring the Link Aggregation Control Protocol (LACP)
R1, R2, R3, and R4 are connected by aggregators (SmartTRUNKs)
st.12
,
st13
,
st.14
,
st.23
,
st.24
, and
st.34
.
Notice that
st.12
,
st.13
,
st.24
, and
st.34
consist of Gigabit Ethernet links, while
st.14
and
st.23
consist of
10/100 Ethernet links. Table 6-1 shows the relationship between the aggregators, the RS switches, and the ports
contained within the LAGs that bind to their respective aggregator.
Configuration for R1:
Table 6-1 Aggregator – RS – port relationship
AGGREGATOR RS SWITCHES PORTS
st.12
R1 gi.1.1, gi.1.2
R2 gi.1.1, gi.1.2
st.13
R1 gi.3.1, gi.4.1
R3 gi.3.1, gi.4.1
st.14
R1 et.5.1, et.5.2
R4 et.5.1, et.5.2
st.23
R2 et.5.1, et.5.2
R3 et.5.1, et.5.2
st.24
R2 gi.3.1, gi.4.1
R4 gi.3.1, gi.4.1
st.34
R3 gi.1.1, gi.1.2
R4 gi.1.1, gi.1.2
smarttrunk create st.12 protocol lacp
smarttrunk create st.13 protocol lacp
smarttrunk create st.14 protocol lacp
lacp set aggregator st.12 port-type gigabit-Ethernet actor-key 10 partner-key 20
lacp set aggregator st.13 port-type gigabit-Ethernet actor-key 10 partner-key 30
lacp set aggregator st.14 port-type 10-100-Ethernet actor-key 11 partner-key 41
lacp set port gi.1.1,gi.2.1 enable port-key 10
lacp set port gi.3.1,gi.4.1 enable port-key 10
lacp set port et.5.1,et.5.2 enable port-key 11
stp set protocol-version rstp
stp enable port st.(12,13,14)