Riverstone Networks WICT1-12 - Manual (Page 250)

15-16 Riverstone Networks RS Switch Router User Guide Release 8.0
Displaying IS-IS Information IS-IS Configuration Guide
R4 Configuration
The following is the configuration for R4 in Area 1:
R4(config)# sh
Running system configuration:
!
! Last modified from Console on 2000-06-28 17:50:12
!
To configure IP interfaces:
1 : interface create ip 21net address-netmask 21.1.1.3/16 port et.1.4
2 : interface create ip 25net address-netmask 25.1.1.1/16 port et.1.1
!
To configure router R4’s area:
3 : isis add area 49.da01
To enables IS-IS on each interface:
4 : isis add interface 21net
5 : isis add interface 25net
To set parameters for each interface:
6 : isis set interface 21net encap iso priority 10 metric 10 level 1
7 : isis set interface 25net encap iso priority 10 metric 10 level 1
To set the IS-IS level of router R4:
8 : isis set level 1-and-2
To start IS-IS on router R4:
9 : isis start
!