Riverstone Networks WICT1-12 - Manual (Page 689)

Riverstone Networks RS Switch Router User Guide Release 8.0 30-85
WAN Configuration Scenarios for Deploying Clear Channel T3 and E3
ISP RS 8000 Configuration
The following configuration applies to the RS 8000 router at the ISP.
!-----------------------------------------------------------------------------
!Configuration for the RS 8000 Clear Channel T3 interface to the Internet
!-----------------------------------------------------------------------------
port set t3.2.1 cablelength 200 wan-encapsulation ppp
interface create ip to_internet address-netmask 155.32.2.1/24 port t3.2.1 up
!-----------------------------------------------------------------------------
!Configuration for the RS 8000 Channelized T3 interface
!-----------------------------------------------------------------------------
port set t3.4.1 cablelength 200
!-----------------------------------------------------------------------------
!Configure the T1 lines on the Channelized T3 interface
!-----------------------------------------------------------------------------
port set t3.4.1:(1-28) timeslots 1-24 wan-encapsulation ppp
!-----------------------------------------------------------------------------
!Configure 7 multilink PPP bundles each containing 4 consecutive T1 lines
!-----------------------------------------------------------------------------
ppp create-mlp mp.1 slot 4
ppp add-to-mlp mp.1 port t3.4.1:(1-4)
ppp create-mlp mp.2 slot 4
ppp add-to-mlp mp.2 port t3.4.1:(5-8)
ppp create-mlp mp.3 slot 4
ppp add-to-mlp mp.3 port t3.4.1:(9-12)
ppp create-mlp mp.4 slot 4
ppp add-to-mlp mp.4 port t3.4.1:(13-16)
ppp create-mlp mp.5 slot 4
ppp add-to-mlp mp.5 port t3.4.1:(17-20)
ppp create-mlp mp.6 slot 4
ppp add-to-mlp mp.6 port t3.4.1:(21-24)
ppp create-mlp mp.7 slot 4
ppp add-to-mlp mp.7 port t3.4.1:(25-28)
interface create ip to_hqsite address-netmask 120.210.11.1/24 port mp.1 up
interface create ip to_rsite2 address-netmask 120.210.12.1/24 port mp.2 up
interface create ip to_rsite3 address-netmask 120.210.13.1/24 port mp.3 up
interface create ip to_rsite4 address-netmask 120.210.14.1/24 port mp.4 up
interface create ip to_rsite5 address-netmask 120.210.15.1/24 port mp.5 up
interface create ip to_rsite6 address-netmask 120.210.16.1/24 port mp.6 up
interface create ip to_rsite7 address-netmask 120.210.17.1/24 port mp.7 up
!-----------------------------------------------------------------------------
!Configure RIP:
!-----------------------------------------------------------------------------
rip add interface to_hqsite
rip add interface to_rsite2
rip add interface to_rsite3
rip add interface to_rsite4
rip add interface to_rsite5
rip add interface to_rsite6
rip add interface to_rsite7
rip add interface to_internet
rip start