Riverstone Networks WICT1-12 - Manual (Page 461)

Riverstone Networks RS Switch Router User Guide Release 8.0 18-31
Routing Policy Configuration Configuring Advanced Routing Policies
2. Create a OSPF export destination for type-2 routes since we would like to redistribute certain routes
into OSPF as type 2 OSPF-ASE routes.
3. Create a Static export source since we would like to export static routes.
4. Create a Direct export source since we would like to export interface/direct routes.
5. Create the Export-Policy for redistributing all interface routes and static routes into OSPF.
Exporting All RIP, Interface & Static Routes to OSPF
Note Also export interface, static, RIP, OSPF, and OSPF-ASE routes into RIP.
In the configuration shown in Figure 18-2 , suppose we decide to run RIP Version 2 on network 120.190.0.0/16,
connecting routers R1 and R2.
We would like to redistribute these RIP routes as OSPF type-2 routes, and associate the tag 100 with them. Router R1
would also like to redistribute its static routes as type 2 OSPF routes. The interface routes would redistributed as type
1 OSPF routes.
Router R1 would like to redistribute its OSPF, OSPF-ASE, RIP, Static and Interface/Direct routes into RIP.
ip-router policy create ospf-export-destination ospfExpDstType2 type 2 metric 4
ip-router policy create static-export-source statExpSrc
ip-router policy create direct-export-source directExpSrc
ip-router policy export destination ospfExpDstType1 source directExpSrc network all
ip-router policy export destination ospfExpDstType2 source statExpSrc network all