Riverstone Networks WICT1-12 - Manual (Page 684)

30-80 Riverstone Networks RS Switch Router User Guide Release 8.0
Scenarios for Deploying Channelized T1, E1 and T3 WAN Configuration
Figure 30-12 Frame Relay over Channelized T1
rsite1 RS 3000 Configuration
port set t1.2.1 framing esf lbo -7.5db
port set t1.2.1:1 timeslots 1-4 wan-encapsulation frame-relay
interface create ip rs1_hq_1 address-netmask 110.110.110.2/24 port t1.2.1:1.106 up
interface create ip rs1_hq_2 address-netmask 110.110.115.3/24 port t1.2.1:1.107 up
frame-relay create vc port t1.2.1:1.106
frame-relay define service CIR1forR1toHQ cir 64000 bc 128000
frame-relay apply service CIR1forR1toHQ ports t1.2.1:1.106
frame-relay create vc port t1.2.1:1.107
frame-relay define service CIR2forR1toHQ cir 64000 bc 128000
frame-relay apply service CIR2forR1toHQ ports t1.2.1:1.107
110.110.110.1
T1
T1
T1 T1
T1
T1
T1
rsite1
rsite2
rsite3 rsite4
rsite5
rsite6
hqsite
110.110.110.2/24
110.110.115.3/24
110.110.120.2/24
110.110.115.4/24
110.110.130.2/24 110.110.140.2/24
110.110.150.2/24
110.110.160.2/24
110.110.110.1/24
110.110.115.1/24
110.110.120.1/24
110.110.115.2/24
110.110.130.1/24
110.110.140.1/24
110.110.150.1/24
110.110.160.1/24
Frame Relay
Network
t1.2.1:1.106
t1.2.1:1.107
t1.2.1:1.106
t1.2.1:1.107
t1.2.1:1.106 t1.2.1:1.106
t1.2.1:1.106
t1.2.1:1.106
t1.2.1:1.106
t1.2.1:1.107
t1.2.1:2.106
t1.2.1:2.107
t1.2.1:3.106
t1.2.1:4.106
t1.2.1:5.106
t1.2.1:6.106