Riverstone Networks WICT1-12 User Manual
Page 667
Riverstone Networks RS Switch Router User Guide Release 8.0 30-63
WAN Configuration
Scenarios for Deploying Channelized T1, E1 and T3
Application Service Provider RS 8000 Configuration
The following configuration applies to the RS 8000 router at the Application Service Provider.
!-----------------------------------------------------------------------------
!Configuration for the RS 8000 T1 interfaces
!-----------------------------------------------------------------------------
!T1 interfaces to the ISP:
!-----------------------------------------------------------------------------
port set t1.2.(1-4) framing esf lbo -7.5db
port set t1.2.(1-4):1 timeslots 1-24 wan-encapsulation ppp
ppp create-mlp mp.1 slot 2
ppp add-to-mlp mp.1 port t1.2.(1-4):1
interface create ip to_msp address-netmask 130.65.20.8/24 port mp.1 up
!-----------------------------------------------------------------------------
!Configure RIP:
!-----------------------------------------------------------------------------
rip add interface to_msp
rip start