Riverstone Networks WICT1-12 - Manual (Page 52)

3-10 Riverstone Networks RS Switch Router User Guide Release 8.0
Naming RS Ports CLI and RS Basics
Table 3-3 Port numbers for line cards
Line Card Port Numbering (Left to Right)
10/100 Base TX 1 2 3 4 5 6 7 8
100 Base FX 3
1 4
2 7
5 8
6
1000 Base SX/LX 1 2
1000 Base LLX 1
Quad Serial WAN 1,2 3,4
HSSI WAN 1 2
SONET (OC-3c) 1 2 3 4
SONET (OC-12c) 1 2
ATM (OC-3) 1 2
16-slot 10/100 Base TX 2
1 4
3 6
5 8
7 10
9 12
11 14
13 16
15
Channelized T1 WIC 1 2
Channelized E1 WIC 1 2
Channelized T3 on the RS 8000
and the RS 8600 1 2
Channelized T3 on the RS 32000
and the RS 38000 1 2 3 4
Multi-rate WAN Module with a
Channelized T1 or Channelized
E1 WIC in each slot 1† 2 3 4
Multi-rate WAN Module with a
Clear Channel T3 or Clear
Channel E3 WIC in each slot 1† 3 1 3
DOCSIS/EuroDOCSIS CMTS 1 US* 2 US 3 US 4 US 1 DS-IF**
† The port numbering, when using a Clear Channel T3 or E3 WIC with a Channelized T1 or E1 WIC
depends on the slot in which the WIC is placed. For example, if a Clear Channel WIC is in the first slot,
and a Channelized WIC in the second, then the port numbers will be 1, 3, and 4. If the position of the
WICs are reversed, then the numbering will be 1, 2, and 3.
* Upstream
** Downstream-Intermediate Frequency