Riverstone Networks WICT1-12 - Manual (Page 569)

Riverstone Networks RS Switch Router User Guide Release 8.0 26-7
QoS Configuration Configuring RS Queueing Policy
26.5.2 Configuring IPX QoS Policies
To configure an IPX QoS policy, perform the following tasks:
1. Identify the Layer-3 or 4 flow, and set the IPX QoS policy.
2. Specify the precedence for the fields within an IPX flow.
Setting an IPX QoS Policy
To set a QoS policy on an IPX traffic flow, enter the following command in Configure mode:
Specifying Precedence for an IPX QoS Policy
To specify the precedence for an IPX QoS policy, enter the following command in the Configure mode:
26.6 CONFIGURING RS QUEUEING POLICY
The RS default queuing policy, strict priority, is set on a system-wide basis. To change the queuing policy for a specific
port or ports to weighted-fair queuing, enter the following command in the Configure mode:
If you want to revert the RS queuing policy from weighted-fair to strict priority (default), enter the following command
in the Configure mode:
Set an IPX QoS policy.
qos set ipx
<name> <priority> <srcnet>
| any
<srcmask>
| any
<srcport>
| any
<dstnet>
| any
<dstmask>
| any
<dstport>
| any
<port list> | <interface-list>
| any
Specify precedence for an IPX
QoS policy.
qos precedence ipx
[
srcnet
<num>] [
srcnode
<num>] [
srcport
<num>] [
dstnet
<num>] [
dstnode
<num>] [
dstport
<num>] [
intf
<num>]
Set queuing policy to
weighted-fair.
qos set queuing-policy weighted-fair port
<port list>
| all-ports
Revert the RS queuing policy to
strict priority.
negate
<line within active-configuration containing qos set
queuing-policy weighted-fair>