Riverstone Networks WICT1-12 - Manual (Page 159)

Riverstone Networks RS Switch Router User Guide Release 8.0 8-25
ATM Configuration Guide Configuring PPP (OC-12)
To display PPP (Point-to-Point Protocol) statistics for an ATM OC-12 line card, use the
atm show ppp
command
as shown in the following example:
rs# atm show ppp port all
----------------------------------------------
at.5.1:
Total LCP (Enabled/Up): 0/0
Total IP (Enabled/Up): 0/0
Total IPX (Enabled/Up): 0/0
Total Bridging (Enabled/Up): 0/0
Total Authentication (Enabled/Up): 0/0
Virtual Path Identifier: 1
Virtual Channel Identifier: 100
LCP Status: Disabled/Down
IP Status: Disabled/Down
IPX Status: Disabled/Down
Bridging Status: Disabled/Down
Authentication Status: Disabled/Down
Authentication Type: None/None