Riverstone Networks WICT1-12 - Manual (Page 456)

18-26 Riverstone Networks RS Switch Router User Guide Release 8.0
Configuring Advanced Routing Policies Routing Policy Configuration
5. Create the export-policy redistributing the statically created default route, and all (RIP, Direct) routes
into RIP.
Exporting a Given Static Route to a Specific RIP Interface
In this case, router R1 would export/redistribute the default route over its interface 140.1.1.1 only.
1. Create a RIP export destination for interface with address 140.1.1.1, since we intend to change the
rip export policy only for interface 140.1.1.1.
2. Create a static export source since we would like to export static routes.
3. Create a RIP export source since we would like to export RIP routes.
4. Create a Direct export source since we would like to export direct/interface routes.
ip-router policy export destination ripExpDst source statExpSrc network default
ip-router policy export destination ripExpDst source ripExpSrc network all
ip-router policy export destination ripExpDst source directExpSrc network all
ip-router policy create rip-export-destination ripExpDst141 interface 140.1.1.1
ip-router policy create static-export-source statExpSrc
ip-router policy create rip-export-source ripExpSrc
ip-router policy create direct-export-source directExpSrc