Riverstone Networks WICT1-12 - Manual (Page 228)

14-12 Riverstone Networks RS Switch Router User Guide Release 8.0
Monitoring OSPF OSPF Configuration Guide
14.10 MONITORING OSPF
The Riverstone RS Switch Router provides two different command sets to display the various OSPF tables:
•
ospf monitor
commands allow you to display the OSPF tables for the router on which the
commands are being entered, as well as for other remote Riverstone RS Switch Routers running
OSPF. The
ospf monitor
commands can be used to display a concise version of the various OSPF
tables. All of the
ospf monitor
commands accept a
destination
option. This option is only
required to display the OSPF tables of a remote Riverstone RS Switch Router.
•
ospf show
commands allow you to display detailed versions of the various OSPF tables. The
ospf
show
commands can only display OSPF tables for the router on which the commands are being
entered.
Following are some examples of the
ospf monitor
and
ospf show
commands.
Following is an example of the
ospf monitor interfaces
command. Information reported includes the area ID,
interface IP address, interface type, interface state, cost, priority, and IP addresses of the designated router and backup
designated router for the network

Following is an example of the
ospf show areas all
command. It displays information about the interfaces in the
area and the area’s link state database 
rs# ospf monitor interfaces
Area: 190.135.89
IP Address Type State Cost Pri DR BDR
-----------------------------------------------------------------------
100.1.1.1 Bcast DR 20 1 7.7.7.7 0.0.0.0
73.1.1.1 PtoP Pt2Pt 3 1 0.0.0.0 0.0.0.0
33.33.33.33 Bcast DR 20 1 7.7.7.7 0.0.0.0
190.135.89.227 Bcast Back DR 20 1 1.1.1.1 7.7.7.7
190.135.89.33 Bcast DR 20 1 7.7.7.7 0.0.0.0
Area 190.135.89
Transit Capability: 0
Area Border Routers: 2
AS Border Routers: 0
Spf count: 42
Local Virtual Links: 0
Router Vertex: 81d509a0
Default Summary Vertex: 0
No Configured Stub Links
No network summariziation ranges
No active tree walks
Interfaces:
Internet Address 100.1.1.1/24, Area 190.135.89
Router ID 7.7.7.7, Network Type Broadcast, Cost: 20
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 7.7.7.7, Interface address 100.1.1.1
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 14:58:33