Riverstone Networks WICT1-12 - Manual (Page 646)

30-42 Riverstone Networks RS Switch Router User Guide Release 8.0
Scenarios for Deploying Channelized T1, E1 and T3 WAN Configuration
Metropolitan Service Provider RS 32000 Configuration
The following configuration applies to the RS 32000 router at the Metropolitan Service Provider.
!-----------------------------------------------------------------------------
!Configuration for the RS 32000 Channelized T3 interface
!-----------------------------------------------------------------------------
port set t3.4.1 cablelength 200
!-----------------------------------------------------------------------------
!Configure the T1 lines on the Channelized T3 interface
!-----------------------------------------------------------------------------
port set t3.4.1:(1-28) timeslots 1-24 wan-encapsulation ppp
!-----------------------------------------------------------------------------
!Configure 4 consecutive T1 lines into multilink PPP bundles
!-----------------------------------------------------------------------------
ppp create-mlp mp.1 slot 4
ppp add-to-mlp mp.1 port t3.4.1:(1-4)
ppp create-mlp mp.2 slot 4
ppp add-to-mlp mp.2 port t3.4.1:(5-8)
ppp create-mlp mp.3 slot 4
ppp add-to-mlp mp.3 port t3.4.1:(9-12)
ppp create-mlp mp.4 slot 4
ppp add-to-mlp mp.4 port t3.4.1:(13-16)
ppp create-mlp mp.5 slot 4
ppp add-to-mlp mp.5 port t3.4.1:(17-20)
ppp create-mlp mp.6 slot 4
ppp add-to-mlp mp.6 port t3.4.1:(21-24)
ppp create-mlp mp.7 slot 4
ppp add-to-mlp mp.7 port t3.4.1:(25-28)
!-----------------------------------------------------------------------------
!Configure VLAN and bridging link to each site:
!-----------------------------------------------------------------------------
vlan create vlan1 port-based id 100
vlan add ports mp.1 to vlan1
interface create ip to_vlan1 address-netmask 120.210.1.1/24 vlan vlan1 up
vlan create vlan2 port-based id 200
vlan add ports mp.2 to vlan2
interface create ip to_vlan2 address-netmask 120.210.2.1/24 vlan vlan2 up
vlan create vlan3 port-based id 300
vlan add ports mp.3 to vlan3
interface create ip to_vlan3 address-netmask 120.210.3.1/24 vlan vlan3 up
vlan create vlan4 port-based id 400
vlan add ports mp.4 to vlan4
interface create ip to_vlan4 address-netmask 120.210.4.1/24 vlan vlan4 up
vlan create vlan5 port-based id 500
vlan add ports mp.5 to vlan5
interface create ip to_vlan5 address-netmask 120.210.5.1/24 vlan vlan5 up
vlan create vlan6 port-based id 600
vlan add ports mp.6 to vlan6
interface create ip to_vlan6 address-netmask 120.210.6.1/24 vlan vlan6 up
vlan create vlan7 port-based id 700
vlan add ports mp.7 to vlan7
interface create ip to_vlan7 address-netmask 120.210.7.1/24 vlan vlan7 up