2 show all command, Show all command -9 – Riverstone Networks WICT1-12 User Manual

Page 713

Advertising
background image

Riverstone Networks RS Switch Router User Guide Release 8.0 31-9

Service Configuration

Showing a Service

31.4.2

Show All Command

To show all services, use the following command:

Here is an example:

The fields are:

Service Name – Name of the service.

Service Type – Type of service applied.

Rate – Rate limit applied by the service.

Exceed Action – The action taken when the rate limit is exceeded.

Source IP/Mask – The source IP address and mask of the flow the service is applied to.

Dest. IP/Mask – The destination IP address and mask of the flow the service is applied to.

SrcPort – The source port of the flow the service is applied to.

DstPort – The destination port of the flow the service is applied to.

TOS – Type of service.

TOS Mask – Type of service mask.

Prot – Type of protocol declared with the service. IP is the default.

Display all services.

service show rate-limit all

[

show-applied

]

! Display all services using the show-applied parameter to show which service is applied to which interface

rs# service show rate-limit all show-applied

---------------------------------------------------------------------------------

Service Name : stoptraffic1 Service Type : Flow Aggregate Rate Limit

Rate : 5000000 bps Exceed Action : Drop Packets

Service stoptraffic1 is applied on interface site1 with following

traffic classification

Source IP/Mask Dest. IP/Mask SrcPort DstPort TOS TOS-MASK Prot

-------------- ------------- --------- --------- --- ------------- ----

1.2.3.4/24 anywhere 80 any any None IP

---------------------------------------------------------------------------------

Service Name : stoptraffic2 Service Type: Aggregate Rate Limit

Rate : 6000000 bps Exceed Action : Lower Priority

Service stoptraffic2 is not applied anywhere

---------------------------------------------------------------------------------

Service Name : stoptraffic3 Service Type: Aggregate Rate Limit

Rate : 4000000 bps Exceed Action : Drop Packets

Service stoptraffic3 is not applied anywhere

---------------------------------------------------------------------------------

Advertising