Riverstone Networks WICT1-12 - Manual (Page 651)

Riverstone Networks RS Switch Router User Guide Release 8.0 30-47
WAN Configuration Scenarios for Deploying Channelized T1, E1 and T3
hqsite RS 8600 Configuration
The following configuration applies to the RS 8600 router at the head office, hqsite.
!-----------------------------------------------------------------------------
!Configuration for the RS 8600 T1 interfaces
!-----------------------------------------------------------------------------
!T1 interfaces to the ISP:
!-----------------------------------------------------------------------------
port set t1.2.1 framing esf lbo -7.5db
port set t1.2.1:1 timeslots 1-24 wan-encapsulation ppp
port set t1.2.2 framing esf lbo -7.5db
port set t1.2.2:1 timeslots 1-24 wan-encapsulation ppp
port set t1.2.3 framing esf lbo -7.5db
port set t1.2.3:1 timeslots 1-24 wan-encapsulation ppp
port set t1.2.4 framing esf lbo -7.5db
port set t1.2.4:1 timeslots 1-24 wan-encapsulation ppp
ppp create-mlp mp.1 slot 2
ppp add-to-mlp mp.1 port t1.2.(1-4):1
interface create ip to_isp address-netmask 120.210.1.2/24 port mp.1 up
!-----------------------------------------------------------------------------
!T1 interface to the remote sites:
!-----------------------------------------------------------------------------
port set t1.3.(1-4) framing esf lbo -7.5db
port set t1.3.(1-4):1 timeslots 1-24 wan-encapsulation ppp
interface create ip to_rsite2 address-netmask 120.210.12.2/24 port t1.3.1 up
interface create ip to_rsite3 address-netmask 120.210.13.3/24 port t1.3.2 up
interface create ip to_rsite4 address-netmask 120.210.14.4/24 port t1.3.3 up
interface create ip to_rsite5 address-netmask 120.210.15.5/24 port t1.3.4 up
port set t1.4.(1-2) framing esf lbo -7.5db
port set t1.4.(1-2):1 timeslots 1-24 wan-encapsulation ppp
interface create ip to_rsite6 address-netmask 120.210.16.6/24 port t1.4.1 up
interface create ip to_rsite7 address-netmask 120.210.17.7/24 port t1.4.2 up
!-----------------------------------------------------------------------------
!Configure RIP:
!-----------------------------------------------------------------------------
rip add interface to_isp
rip add interface to_rsite2
rip add interface to_rsite3
rip add interface to_rsite4
rip add interface to_rsite5
rip add interface to_rsite6
rip add interface to_rsite7
rip start