Riverstone Networks WICT1-12 User Manual

Page 647

Advertising
background image

Riverstone Networks RS Switch Router User Guide Release 8.0 30-43

WAN Configuration

Scenarios for Deploying Channelized T1, E1 and T3

hqsite RS 3000 Configuration

The following configuration applies to the RS 3000 router at the head office, hqsite.

rsite2 RS 3000 Configuration

The following configuration applies to router RS 3000 at the remote site, rsite2.

!-----------------------------------------------------------------------------

!Configuration for the RS 3000 T1 interfaces

!-----------------------------------------------------------------------------

!T1 interfaces to the MSP:

!-----------------------------------------------------------------------------

port set t1.2.(1-4) framing esf lbo -7.5db

port set t1.2.(1-4):1 timeslots 1-24 wan-encapsulation ppp

ppp create-mlp mp.1 slot 2

ppp add-to-mlp mp.1 port t1.2.(1-4):1

!-----------------------------------------------------------------------------

!Configure VLAN and bridging for link to MSP:

!-----------------------------------------------------------------------------

vlan create vlan1port-based id 100

vlan add ports mp.1 to vlan1

interface create ip vlan_to_msp address-netmask 120.210.1.2/24 vlan vlan1 up

!-----------------------------------------------------------------------------

!Configuration for the RS 3000 T1 interfaces

!-----------------------------------------------------------------------------

!T1 interfaces to the SP:

!-----------------------------------------------------------------------------

port set t1.2.(1-4) framing esf lbo -7.5db

port set t1.2.(1-4):1 timeslots 1-24 wan-encapsulation ppp

ppp create-mlp mp.2 slot 2

ppp add-to-mlp mp.2 port t1.2.(1-4):1

!-----------------------------------------------------------------------------

!Configure VLAN and bridging for link to MSP:

!-----------------------------------------------------------------------------

vlan create vlan2 port-based id 200

vlan add ports mp.2 to vlan2

interface create ip vlan_to_msp address-netmask 120.210.2.2/24 vlan vlan2 up

Advertising