Figure 5-4, Multiple customers with different vlans -21, Traf – Riverstone Networks WICT1-12 User Manual
Page 85
Riverstone Networks RS Switch Router User Guide Release 8.0 5-21
Bridging Configuration Guide
Tunneling VLAN packets across MANs
Figure 5-4 Multiple customers with different VLANs
The following is the configuration for R1:
! Create 1 backbone VLAN and 2 customer VLANs
vlan create RED port-based
vlan create GREEN port-based
vlan create BLUE port-based
! Add port to each VLAN
vlan add ports et.2.1 to BLUE
vlan add ports et.3.1 to GREEN
vlan add ports et.4.1 to RED
! Make et.4.1 both a trunk port and a tunnel backbone port
vlan make trunk-port et.4.1 stackable-vlan
! Map tunnel entry ports to backbone VLAN
vlan enable stackable-vlan on et.2.1 backbone-vlan RED
vlan enable stackable-vlan on et.3.1 backbone-vlan RED
et.2.1
et.3.1
et.4.1
et.5.1
et.6.1
et.7.1
MAN
RED VLAN (backbone)
BLUE VLAN
GREEN VLAN
C1
C2
C1
C2