Riverstone Networks WICT1-12 - Manual (Page 671)

Riverstone Networks RS Switch Router User Guide Release 8.0 30-67
WAN Configuration Scenarios for Deploying Channelized T1, E1 and T3
hqsite RS 8600 Configuration
The following configuration applies to the RS 8600 router at the head office, hqsite.
!-----------------------------------------------------------------------------
!Configuration for the RS 8600 Channelized T3 interface
!-----------------------------------------------------------------------------
port set t3.4.1 cablelength 200
!-----------------------------------------------------------------------------
!Configure the T1 lines on the Channelized T3 interface
!-----------------------------------------------------------------------------
port set t3.4.1:(1-4) timeslots 1-24 wan-encapsulation ppp
!-----------------------------------------------------------------------------
!Configure a multilink PPP bundle containing 4 consecutive T1 lines
!-----------------------------------------------------------------------------
ppp create-mlp mp.1 slot 4
ppp add-to-mlp mp.1 port t3.4.1:(1-4)
interface create ip to_msp address-netmask 120.210.11.2/24 port mp.1 up
!-----------------------------------------------------------------------------
!Configure RIP:
!-----------------------------------------------------------------------------
rip add interface to_msp
rip start