Riverstone Networks WICT1-12 - Manual (Page 254)

15-20 Riverstone Networks RS Switch Router User Guide Release 8.0
Displaying IS-IS Information IS-IS Configuration Guide
R9 Configuration
The following is the configuration for R9 in Area 3:
R9(config)# sh
Running system configuration:
!
! Last modified from Console on 2000-06-28 11:32:26
!
To create IP interfaces:
1 : interface create ip 40net address-netmask 40.1.1.2/16 port et.1.2
2 : interface create ip 42net address-netmask 42.1.1.1/16 port et.1.1
!
To configure the IS-IS area of router R9:
3 : isis add area 49.da03
To enable IS-IS on each interface:
4 : isis add interface 40net
5 : isis add interface 42net
To set the parameters for each interface:
6 : isis set interface 40net encap iso level 1 priority 10 metric 10
7 : isis set interface 42net encap iso level 1 priority 10 metric 10
To set the IS-IS level of router R9:
8 : isis set level 1
To start ISIS on R9:
9 : isis start
!