Riverstone Networks WICT1-12 - Manual (Page 158)

8-24 Riverstone Networks RS Switch Router User Guide Release 8.0
Configuring PPP (OC-12) ATM Configuration Guide
Figure 8-5 PPP configuration example
Following is the configuration for the RS:
Create a virtual channel for the PPP connection.
rs(config)# atm create vcl port at.1.1.0.200
Define the PPP service profile.
rs(config)# atm define service cm1 srv-cat rt-vbr encaps vc-mux traffic
ppp ppp-auth chap
Apply the service profile to the VC.
atm apply service cm1 port at.2.1.0.200
For this configuration example, configure RADIUS for PPP authentication on an AAA server.
rs(config)# radius set key secretpassword
Identify the AAA server.
rs(config)# radius set server 10.1.1.1
Enable RADIUS authentication.
rs(config)# radius enable
at.1.1
RS
AAA Server
DSL Modem
et.1.1
DSLAM
10.1.1.1