Riverstone Networks WICT1-12 - Manual (Page 191)

Riverstone Networks RS Switch Router User Guide Release 8.0 11-13
IP Routing Configuration Guide Forwarding Mode
• define a profile
• apply the profile to a slot
• enable the profile on a specific port
Defining a Profile
When you define a custom forwarding profile, you should identify it and specify which fields will be wild carded:
Use the following command to define a custom forwarding profile.
Applying a Profile
You can apply a profile to a slot. AFter you apply it to a slot, you should enable it on the ports in a slot.
Use the following command to apply a profile to a slot.
Enabling a Port
After you apply a custom forwarding profile to a slot, you can enable it on a per port basis. Ports on which the
forwarding profile is enabled will use it to forward packets. Ports on which the forwarding profile is not enabled will
use the default forwarding mode.
To enable custom forwarding on a port:
11.15.3 Monitoring Custom Forwarding Profiles
To view custom forwarding profiles, enter any of the following commands in Enable mode:.
ip define custom-forwarding-profile <string> sip-host-wildcard |
dip-host-wildcard | proto-wilcard |dst-sock-wildcard |src-sock-wildcard
| tos-wildcard
ip apply custom-forwarding-mode <string>
ip enable custom-forwarding-mode port
SRUWOLVW!
Display one or more custom forwarding
profiles.
ip show custom-forwarding-profile
<string>
| all
Display the custom forwarding profile of
the specified slot(s).
ip show custom-forwarding-mode slot
<number>
|all