Ibgp accounting example – Riverstone Networks WICT1-12 User Manual
Page 303
Riverstone Networks RS Switch Router User Guide Release 8.0 16-45
BGP Configuration Guide
BGP Configuration Examples
IBGP Accounting Example
In the example below, routers R1 and R2 are running IBGP/RIP, so they exchange routes automatically. Customer
traffic from 13.1.1.5 is being routed to the destination 14.1.1.1/16. The customer is connected to router R1 through
the interface ’customerA.’ The route to 14.1.0.0/16 is a direct route on router R2 and is learned by R1, which sets the
traffic index to 1.
Figure 16-13Sample BGP configuration (accounting)
The following configurations enable BGP accounting on interface ’customerA’ to tally the number of bytes and packets
sent by the customer.
R
1
R
2
14.1.0.0/16
12.1.1.1/16
et.3.2
et.3.1
Customer
AS-1
et.14.5
13.1.1.5
12.1.1.2/16
et.14.8
Enable accounting on this interface