Riverstone Networks WICT1-12 - Manual (Page 323)

Riverstone Networks RS Switch Router User Guide Release 8.0 17-15
MPLS Configuration RSVP Configuration
The following sections describe the RSVP parameters in more detail.
17.3.2 RSVP Refresh Intervals
As mentioned previously, RSVP soft state management depends upon periodic refreshes of the Path and Resv
messages. RSVP Path and Resv refresh messages are sent periodically to refresh the states in neighbor routers and
ensure that these states do not time out.
In the following formulas, lifetime is how long an RSVP router keeps a path or reservation state as a valid state:
path-lifetime = path-multiplier * path-refresh-interval
resv-lifetime = resv-multiplier * resv-refresh-interval
Table 17-3 RSVP parameters on the RS
Parameter Default Value Command to Change Default Value
Path refresh:
path refresh interval
path multiplier
30 seconds
3
rsvp set global path-refresh-interval
rsvp set global path-multiplier
Reservation refresh:
reservation refresh interval
reservation multiplier
30 seconds
3
rsvp set global resv-refresh-interval
rsvp set global resv-multiplier
Hello packets:
hello interval
hello multiplier
(Disabled)
3 seconds
3
rsvp set interface
<interface>
hello-enable
rsvp set global hello-interval
rsvp set global hello-multiplier
Authentication:
MD5 signature
(Disabled)
rsvp set interface
<interface>
auth-method md5
Blockade aging:
interval 60 seconds
rsvp set global blockade-aging-interval
Message aggregation:
bundle interval
(Disabled)
5 seconds
rsvp set interface
<interface>
aggregate-enable
rsvp set global bundle-interval
Message ID extensions:
summary refresh interval
acknowledgement interval
(Disabled)
3 seconds
1 second
rsvp set interface
<interface>
msgid-extensions-enable
rsvp set global msgid-list-interval
rsvp set global msgack-interval