Riverstone Networks WICT1-12 - Manual (Page 257)

Riverstone Networks RS Switch Router User Guide Release 8.0 15-23
IS-IS Configuration Guide Displaying IS-IS Information
R11 Configuration
The following is the configuration for R11 in Area 4:
R11(config)# sh
Running system configuration:
!
! Last modified from Console on 2000-06-28 10:19:40
!
To configure the WAN port se.4.3:
1 : port set se.4.3 wan-encapsulation ppp speed 45000000
!
To configure IP interfaces:
2 : interface create ip 52net address-netmask 52.1.1.2/16 port se.4.3
3 : interface create ip 51net address-netmask 51.1.1.2/16 port et.1.2
4 : interface add ip en0 address-netmask 10.50.3.11/16
!
To configure the IS-IS area of router R11:
5 : isis add area 49.0004
To enable IS-IS on each interface:
6 : isis add interface 51net
7 : isis add interface 52net
To set the IS-IS level of router R11:
8 : isis set level 1
To set the parameters for each interface:
9 : isis set interface 51net level 1 encap iso priority 10 metric 10
10 : isis set interface 52net level 1 encap iso priority 10 metric 10
To start IS-IS on the router:
11 : isis start
!