Riverstone Networks WICT1-12 - Manual (Page 555)

Riverstone Networks RS Switch Router User Guide Release 8.0 25-9
Security Configuration Layer-2 Security Filters
To configure Layer-2 secure port filters, enter the following commands in Configure mode:
25.2.5 Monitoring Layer-2 Security Filters
The RS provides display of Layer-2 security filter configurations contained in the routing table.
To display security filter information, enter the following commands in Enable mode.
25.2.6 Layer-2 Filter Examples
Figure 25-1 shows the router connections for which layer-2 security filters will be configured.
Figure 25-1 Source filter example
Configure a source secure port filter.
filters add secure-port name
<name>
direction source vlan
<VLAN-num>
in-port-list
<port-list>
Configure a destination secure port
filter.
filters add secure-port name
<name>
direction destination
vlan
<VLAN-num>
in-port-list
<port-list>
Show address filters.
filters show address-filter
[all-source|all-destination|all-flow] [source-mac
<MACaddr>
dest-mac
<MACaddr>
] [ports
<port-list>
] [vlan
<VLAN-num>
]
Show port address lock
filters.
filters show port-address-lock ports [ports
<port-list>
] [vlan
<VLAN-num>
] [source-mac
<MACaddr>
]
Show secure port filters.
filters show secure-port
Show static entry filters.
filters show static-entry
[all-source|all-destination|all-flow] ports
<port-list>
vlan
<VLAN-num>
[source-mac
<MACaddr>
dest-mac
<MACaddr>
]
et.1.1 et.1.2 et.1.3
Hub
Engineers,
Consultant
Engineering
File Servers Finance
File Servers
Router