2 driver options, 1 device parameters, Driver options – CIRCUTOR PowerStudio Series User Manual
Page 111: Device parameters
PowerStudio
User Manual 111
Device model. Using the model, PowerStudio can determine which variable the device
measures and avoid requesting those it does not.
Expansion card.
Variable used to calculate the maximum demand.
Variables measurement scale. This will be used by PowerStudio for the correct display of
values shown on screen
1.31.2 Driver options
Options menu:
The ‘Variable units‘ and ‘Variable limits‘ options are explained in detail in sections 1.1.2
Variable Units and 1.1.3 Variable limits, respectively.
1.31.2.1 Device parameters
It is not possible to configure the device when it communicates via the MODBUSTCP
connection.
This screen allows the internal parameters of the device to be configured. Upon opening the
dialogue box, the software will read the device configuration. When complete, click on ‘Accept’ for the
software to send information on changes to the device. In no case will the information be stored on the
hard drive of the PC.