CIRCUTOR PowerStudio Series - Manual (Page 196)

PowerStudio PowerStudio
196 User Manual
1.49.- LM50-TCP
1.49.1 Driver options
You can access the LM50-TCP options from:
• View Menu: Refer to ‘Editor manual’.
• Toolbar. Refer to ‘Editor manual’.
The following is the options menu:
1.49.1.1 Device parameters
This screen allows the internal parameters of the device to be configured. On opening the
dialogue box, the software will read the configuration of the device. When complete, click on ‘Accept’
for the software to send information on changes to the device. In no case will the information be stored
on the hard drive of the PC.