CIRCUTOR PowerStudio Series - Manual (Page 140)

PowerStudio PowerStudio
140 User Manual
1.36.- CVM-NET4
1.36.1 Driver options
The device options are as follows:
The ‘Variable units‘ and ‘Variable limits‘ options are explained in detail in sections 1.1.2
Variable units and 1.1.3 Variable limits, respectively.
1.36.1.1 Device parameters
This screen allows the internal parameters of the device to be configured. When the dialog box
is opened, the software will read the device's configuration. When this procedure is complete, click on
‘Accept’ and the software will send the information to the device if any changes have been applied. The
information will never be stored on the hard drive of the PC.