CIRCUTOR PowerStudio Series - Manual (Page 252)

PowerStudio PowerStudio
252 User Manual
1.66.- TR8
This device may be configured as master or slave, and up to 31 slave devices can be connected
to a master device. At the time the slave devices are connected to the master, 30 seconds will be
required to detect all the devices. If PowerStudio is started during this time, the values of the devices
that have not yet been detected will not be monitored.
1.66.1 Driver options
Options menu:
The ‘Variable units‘ and ‘Variable limits‘ options are explained in detail in sections 1.1.2 Variable units
and 1.1.3 Variable limits, respectively.
1.66.1.1 Device parameters
This screen allows some of the internal parameters of the device to be viewed, and it is not
possible to change any of the configuration parameters. In no case will the information be stored on the
hard drive of the PC.