CIRCUTOR PowerStudio Series - Manual (Page 56)

PowerStudio PowerStudio
56 User Manual
Shows general information.
The following can be configured:
• Type of pre-alarm relay. Operation method of the pre-alarm relay common to all
channels of the device.
• Pre-alarm threshold. Pre-alarm threshold the equipment possesses. This can vary
between 50 and 100% of the minimum trigger threshold of the device channels.
A trigger threshold and a user-personalized delay time can be configured by the user. These
parameters are common to all channels of the device. Depending on the type of channel selected, the
customized threshold may be selected or not.
This selector allows the equipment to have the channel reconnections enabled or not.
Depending on whether the reconnections are enabled or not, some of the channel configuration fields
will be enabled or disabled. Clicking on the ‘Synchronize clock’ button the present PC time will be sent
to the device.
% Of hysteresis for the connection and disconnection of the channel configured in the relay
mode.
Shows the channel configuration.
As it is only possible to display the
configuration of one channel at a time, click on one of the channels to display the corresponding
configuration.