CIRCUTOR PowerStudio Series - Manual (Page 28)

PowerStudio PowerStudio
28 User Manual
4. Differential current value detected when the channel triggers. If the value detected is twice the
trigger threshold configured it is shown in purple.
5. Trigger current configured.
6. Delay time configured.
7. Adjustment button. Enables programming of sensitivity and channel delay.
8. OFF button. External disconnection of the channel. The button will remain disabled if the
channel has been triggered.
9. Reset button. Push the button to restart the channel.The button will remain disabled if the
channel has not triggered.
10. Current value display units.
11. Channel trigger threshold value configured.
12. Channel pre-alarm value configured.
13. Channel Instantaneous differential current value. When the channel instantaneous differential
current value exceeds the limits of the values bar, either by excess or default, it will be
indicated as shown in the figure (arrow in the bar).
14. Pre-alarm status:
•
Disabled status.
•
Triggered status.
15. Additional information on the status of the pre-alarm.
16. Reset button. Resets all the device channels that are triggered.