CIRCUTOR PowerStudio Series - Manual (Page 214)

PowerStudio PowerStudio
214 User Manual
Shows general information.
Use this selector to configure the type of distortion the device will calculate.
Maximum demand will be activated in PowerNet devices with version 1.01 or higher of
firmware.
• Period: This is the maximeter integration period and can vary between 1 and 60 minutes.
• Window type: Type of window used to save the maximeter value, this can be fixed or sliding.
• Unit: The maximum demand can be calculated with active power III, apparent power III,
current III or current by phase depending on the device.
• Maximeter reset: When the button is pressed, the device maximeter resets to zero.
Clicking the button will reset the device energy counters to zero.