CIRCUTOR PowerStudio Series - Manual (Page 184)

PowerStudio PowerStudio
184 User Manual
1.46.1.2 Device inputs
Four variables will be available for each of the LM25-M inputs, a digital value to show the input
status (open / closed), a meter variable to show the number of pulses detected in the input, a time
meter variable to show the time during which the input is activated and, finally, a flow variable
calculated by the software as an estimate of the pulse frequency that occurs in the input during a
period of time.
The LM25-M inputs can be configured on this dialog box:
Select the tabs to change the display of the configuration of the different types of variables
which can be configured. The previous image shows the configuration of the meters, where:
• Description: Alphanumeric data used to enter a brief description of the meter for a
better identification.
• Unit: Alphanumeric data used to enter a brief description of the units on which the
meter will be displayed.
• Factor: Multiplier value of each input pulse.