CIRCUTOR PowerStudio Series - Manual (Page 193)

PowerStudio
User Manual 193
Shows general information.
Configuration of the pulse duration that can be generated with the digital outputs of the device.
This part of the configuration corresponds to the device counters. If the selector is checked,
on sending the configuration the energy counter will be loaded with the values entered into the
corresponding boxes.
1.48.1.2 Device inputs
For each of the inputs of the LM4I-4O-M, three variables will be available: a digital display to
show the status of the input (open / closed), a counter variable to show the number of pulses detected
at the input, and finally a flow variable calculated by the software as an estimate of the pulse frequency
on the input during a period of time.
Using this dialogue the inputs and outputs of the LM4I-4O-M can be configured,
Using the display configuration of the different types of
variables can be configured. The previous image shows the configuration of the counters, where:
• Description: Alphanumeric type which permits a brief description of the counter so it
can be identified better.