CIRCUTOR PowerStudio Series - Manual (Page 246)

PowerStudio PowerStudio
246 User Manual
It will only be possible to assign an IP address to the device if it is on the same network as
the computer running the program.
If the answer is ‘Yes’, the following dialogue box will appear, which will permit an IP address to
be assigned to the device.
Where:
• Physical address (MAC): Ethernet address that each device has, which is unique and distinct
on all network devices. The hardware address that any network interface has. Will be of the
type 00-26-45-61-05-19.
• IP address: IP Address to be allocated to the device that has the physical address introduced
in the previous field.
If it is possible to assign an IP address to the converter, the following dialogue box will appear:
To finish setting up the rest of the parameters for communication with the device.