CIRCUTOR PowerStudio Series - Manual (Page 86)

PowerStudio PowerStudio
86 User Manual
1.23.- GENERIC TCP CONVERTER
5
The generic TCP converter connects devices that work with serial communication (RS-232/RS-
485) to an Ethernet network using the IP protocol (TCP for connection-oriented communications).
Due to the large number of converters that can be found on the market. On adding this
device the program will not attempt to detect or verify that the configuration is correct.
The configuration and the proper functioning of communications between the converter and
the program is the responsibility of user.
For more information on how to configure the converter consult the device manual.
For more information on how to configure this converter see section 1.22 Generic UDP converter.
1.24.- MODBUSTCP GENERIC CONVERTER
6
The ModbusTCP generic converter connects devices that work with serial communication (RS-
232/RS-485) to an Ethernet network using the IP protocol (ModbusTCP for connection-orientated
communications).
Due to the large number of converters that can be found on the market. On adding this
device the program will not attempt to detect or verify that the configuration is correct.
The configuration and the proper functioning of communications between the converter and
the program is the responsibility of user.
For more information on how to configure the converter consult the device manual.
For more information on how to configure this converter see section 1.22 Generic UDP converter.
5
Only in Deluxe version
6
Only in Deluxe Version