CIRCUTOR PowerStudio Series User Manual
Page 72
PowerStudio PowerStudio
72 User Manual
From the alarms tab we can see how the alarms are configured for temperature, voltage,
differential current, ic loss, non-compensated Kvar, phi cosine, low current, thdv, thdixi, thdi step and
thdic.
• Output: This field shows whether the output is configured as normally open, normally closed
or disabled.
• Max: In this box the maximum alarm value is indicated.
• Min: In this box the minimum alarm value is indicated.
• Relay: Allows one to indicate whether or not the alarm is associated with the global alarms
relay.
From the capacitors tab the numeric capacity value of the 16 capacitors and their kVar or MVar
units, voltage value and their V or kV units, the DELTA or WYE connection type and the type of PH-PH
or TRIPH compensation may be seen.