3 contracted power, Contracted power – CIRCUTOR PowerStudio Series User Manual
Page 44
Advertising
PowerStudio PowerStudio
44 User Manual
Displays general information.
• Voltage transformation ratio: shows the ratio between primary and secondary voltage
programd into the device.
• Power transformation ratio: Shows the ratio between the primary and secondary currents
programd into the device.
1.10.2.3 Contracted power
This screen allows the contracted loads for each contract and CIRWATT rate to be displayed.
It is always be possible to enter contracted power manually, but if the device is IEC enabled it can also
be read directly from the equipment by clicking the button
.
Advertising