CIRCUTOR PowerStudio Series - Manual (Page 43)

PowerStudio
User Manual 43
1.10.2.1 Driver parameters
Allows the contracts to be displayed on screen to be selected. Using these selectors the
contracts shown on screen can be selected. In this case the driver displays contracts 1 and 3, and will
hide contract 2. These parameters will only affect the screen display of the CIRWATT device contracts
but not the internal configuration of the CIRWATT device.
The remaining parameters are explained in section 1.1.1 Driver Parameters.
1.10.2.2 Device parameters
This screen will allow a series of internal information and device parameters to be displayed on
screen.