CIRCUTOR PowerStudio Series - Manual (Page 127)

PowerStudio
User Manual 127
1.32.1.3.3 4 digital outputs / 4 analogue outputs
Use to switch between configuring analogue and digital card outputs. In the
previous image the configuration of the digital outputs can be seen.
For more information on configuring the digital outputs consult the section 1.32.1.3.1 Digital
input / output.
Analogue output configuration is shown in the following image:
For each of the analogue inputs the following can be configured:
• Variable: Permits any parameter the device measures for analogue outputs to be selected
• Value -5 mA: Value of the parameter which is assigned to the -5 mA output.
• Value +5 mA: Value of the parameter which is assigned to the + 5 mA output.