Download with protocol iec 870-5-102, 2 driver options, Cirwatt – CIRCUTOR PowerStudio Series User Manual
Page 42: Driver options
PowerStudio PowerStudio
42 User Manual
1.10.- CIRWATT
1.10.1 Download with protocol IEC 870-5-102
The CIRWATT device allows load curve and bill closures files to be downloaded through the
IEC 870-5-102 protocol. To enable downloading when new equipment is added the "Download files
(IEC 870-5-102)" option must be selected and the gateway, the measuring point address, and
password configured.
From this screen it is possible to configure the time zone where the CIRWATT is located, by
default the time zone of the software will appear but this should be modified if a new device is found in
a different time zone.
1.10.2 Driver options
Options menu:
The ‘Variable units‘ and ‘Variable limits‘ options are explained in detail in sections 1.1.2
Variable Units and 1.1.3 Variable limits, respectively.