2 inputs/outputs, Inputs/outputs – CIRCUTOR PowerStudio Series User Manual
Page 237
Advertising
PowerStudio
User Manual 237
General R-440 Embedded device
information
It is possible to load a value into
device's counters.
Allows you to send the PC date and time to
the R-440 Embedded device.
1.61.1.2 Inputs/Outputs
By means of
one can switch between the flow, digital inputs and
outputs configurations of the counters. The previous image shows the configuration of the counters.
For each of the four counters it is possible to configure the following information:
Description: Alphanumeric type data to identity the counter on the device display.
Unit: Alphanumeric type datum to identify the counter units.
Factor: Multiplier value which can be read on the counter.
Advertising