CIRCUTOR PowerStudio Series - Manual (Page 135)

PowerStudio
User Manual 135
This section shows the configuration of the device relay output and the option to configure it
with the desired values is given.For CVM-MINI devices the two relay outputs of these devices can be
configured.
• Variable: The parameters associated with the relay are indicated in this field. The output is
programd as an alarm or energy pulse with any of the parameters measured by the device
being able to be controlled. The maximum and minimum alarm unit values are indicated in
brackets.
• Max: This box indicates the maximum value to be controlled.If an energy variable is selected,
the value of each pulse will be indicated. This will be displayed as follows:
• Min: This box indicates the minimum value to be controlled.If you select an energy variable,
this field will remain disabled.
• Delay: Alarm delay in seconds. The maximum value is 9999 seconds.This field will remain
deactivated if an energy variable is chosen.