CIRCUTOR PowerStudio Series - Manual (Page 205)

PowerStudio
User Manual 205
Clicking the button will reset the partial power counter to zero.
This section shows the configuration of the device relay output and the option to configure it
with the desired values is given.
• Variable: The parameters associated with the relay are indicated in this field. The output is
programd as an alarm, and any of the parameters measured by the device can be controlled.
The maximum and minimum alarm unit values are indicated in brackets.
• Max: This box indicates the maximum value to be controlled.
• Min: This box indicates the minimum value to be controlled.
• Delay: Alarm delay in seconds. The maximum value is 9999 seconds.