2 analogue inputs and outputs, 3 variable limits, Analogue inputs and outputs – CIRCUTOR PowerStudio Series User Manual
Page 144: Variable limits
PowerStudio PowerStudio
144 User Manual
1.37.1.2 Analogue inputs and outputs
From this dialogue the analogue inputs on the CVM-R8 devices with analogue inputs and/or
outputs can be configured.
• Description: Alphanumeric type information which enables a brief description to be entered
for better identification.
• Unit: Alphanumeric type data which permits a brief description of the units to be entered.
• Zero: Value of the parameter to which the zero of the scale is assigned.
• Fullscale: Value of the parameter to which the maximum value of the scale is assigned.
• Type: Type of entry, allows between 0-20 mA, 4-20 mA or 0 -? to be chosen V
1.37.1.3 Variable limits
Only for CVM-R8 devices with analogue inputs.
This option has been detailed in section 1.1.3 Variable limits.